描述 Description

The TC4421A/TC4422A are improved versions of the earlier TC4421/TC4422 family of single-output MOSFET gate drivers. These devices are high-current buffer/drivers capable of driving large MOSFETs and Insulated Gate Bipolar Transistors (IGBTs). The TC4421A/TC4422A have matched output rise and fall times, as well as matched leading and falling-edge propagation delay times. The TC4421A/TC4422A devices also have very low cross-conduction current, reducing the overall power dissipation of the device.These devices are essentially immune to any form of upset, except direct overvoltage or over-dissipation. They cannot be latched under any conditions within their power and voltage ratings. These parts are not subject to damage or improper operation when up to 5 V of ground bounce is present on their ground terminals. They can accept, without damage or logic upset, more than 1 A inductive current of either polarity being forced back into their outputs. In addition, all terminals are fully protected against up to 4 kV of electrostatic discharge.The TC4421A/TC4422A inputs may be driven directly from either TTL or CMOS (3 V to 18 V). In addition, 300 mV of hysteresis is built into the input, providing noise immunity and allowing the device to be driven from slowly rising or falling waveforms. With both surface-mount and pin-through-hole packages, in addition to a wide operating temperature range, the TC4421A/TC4422A family of 9 A MOSFET gate drivers fit into most any application where high gate/line capacitance drive is required.

特性 Features

Latch up Immunity
Matched Rise and Fall Times
Input withstands negative swings up to 5 V
High peak Output current of 9 A
High Capacitive Load drive Capability 10 nF in 25 ns
Wide Operating Range 4.5 V to 18 V
Low Propagation Delay Times Low Output Impedance 800 mΩ
low supply current (450μA w/ logic 1 input)
Can Withstand Up to 1.5 A of Output Reverse Current
Reduced shoot through current
Wide Operating Temperature Range -55oC to +125oC

簡介

TC4422A屬于集成電路（IC）的柵極驅動器。由制造生產的TC4422A柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。