STULPI01BTBR屬于集成電路（IC）的驅動器接收器收發器。由意法半導體集團制造生產的STULPI01BTBR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

描述 Description

The STULPI01 is a high speed USB 2.0 transceiver compliant with ULPI (UTMI+ low pin interface) and OTG (On-The-Go) specifications, providing a complete physical layer solution for any high speed USB host, device or OTG dual role core. It allows USB ASICs to interface with the physical layer of the USB through a 12-pin interface. It contains VBUS comparators, ID line detector, USB differential driver and receivers and complete ULPI register map and interrupt generator. The STULPI01 transceiver is suitable for mobile applications and battery powered devices because of its low power consumption, power down operating mode and minimal die/package dimensions.

特性 Features

■ USB-IF high speed certified to the Universal Serial Bus specification Rev 2.0.

■ Meets the requirements of the Universal Serial Bus specification revision 2.0, On-The-Go supplement to the USB 2.0 specification 1.0a and ULPI transceiver specification 1.1.

■ Standard ULPI (UTMI+ low pin interface) 1.1 digital interface.

■ Fully compliant with ULPI 1.1 register set.

■ External square wave clock with 1V8VIO amplitude must be applied to oscillator input XI.

■ Supports 480 Mbit/s high speed, 12 Mbit/s full speed and 1.5 Mbit/s low speed modes of operation.

■ Supports 2.7 V UART mode.

■ Supports session request protocol (SRP) and host negotiation protocol (HNP) for dual-role device features.

■ Ability to control external charge pump for higher VBUS currents.

■ Single supply, +3 V to +4.5 V voltage range.

■ Integrated dual voltage regulator to supply internal circuits with stable 3.3 V and 1.2 V.

■ Integrated over current detector.

■ Integrated HS termination and FS/LS/OTG pull-up/pull-down resistors.

■ Integrated USB 2.0 “short-circuit withstand” protection.

■ Power down mode with very low power consumption for battery-powered devices.

■ Ideal for system ASICs with built-in USB host, device or OTG cores.

■ Available in μTFBGA36 RoHS package.

■ -40 °C to 85 °C operating temperature range.

Applications

■ Mobile phones

■ PDAs

■ MP3 players

■ Digital still cameras

■ Set top box

■ Portable navigation devices