描述 Description

STNRG devices are a part of the STNRG family of STMicroelectronics? digital devices designed for advanced power conversion applications.
The STNRG improves the design of the successful STLUX? family, now integrated in a wide range of LED driver architectures, to support industrial power conversion applications such as PFC+LLC, interleaved LC DC/DC, interleaved PFC for smart power supplies as well as the full bridge for pilot line drivers for electric vehicles.

特性 Features

? Up to 6 programmable PWM generators (SMED - “State Machine Event Driven”)
? 10 ns event detection and reaction
? Max.1.3 ns PWM resolution
? Single, coupled and two coupled operational modes
? Up to 3 internal/external events per SMED
? 4 analog comparators
? 4 internal 4-bit references
? Up to 4 external references
? Less than 50 ns propagation time
? Continuous comparison cycle
? Configurable hysteresis voltage levels
? ADCs (up to 8 channels)
? 10-bit precision, with operational amplifier to extend resolution to 12-bit equivalent
? Sequencer functionality
? Input impedance: 1 MΩ
? Configurable gain value: x1 and x4
? Integrated microcontroller
? Advanced STM8? core with Harvard architecture and 3-stage pipeline
? Max. fCPU: 16 MHz
? Memories
? Flash and E2PROM with read while write (RWW) and error correction code (ECC)
? Program memory: 32 Kbytes Flash; data retention 15 years at 85 °C after 10 kcycles at 25 °C
? Data memory: 1 Kbyte true data E2PROM; data retention:15 years at 85 °C after 100 kcycles at 85 °C
? RAM: 6 Kbytes
? Clock management
? Internal 96 MHz PLL
? Low power oscillator circuit for external crystal resonator or direct clock input
? Internal, user-trimmable 16 MHz RC and low power 153.6 kHz RC oscillators
? Clock security system with clock monitor
? Basic peripherals
? System, auxiliary and basic timers
? IWDG/WWDG watchdog, AWU, ITC
? Reset and supply management
? Multiple low power modes (wait, slow, auto- wakeup, Halt) with user definable clock gating
? Low consumption power-on and power- down reset
? I/O
? Multifunction bidirectional GPIO with highly robust design, immune against current injection
? Fast digital input DIGIN, with configurable pull-up
? Communication interfaces
? UART asynchronous with SW flow control and bootloader support
? I2C master/slave fast-slow speed rate
? Operating temperature: -40 °C up to 105 °C.

簡介

STNRG288A屬于集成電路（IC）的電源管理-專用。由制造生產的STNRG288A電源管理 - 專用專用型電源管理集成電路 (PMIC) 用于電源的控制或操作，適合特定或小范圍的目標應用，例如汽車氣囊管理、電容器組平衡、AC 公共電力監控、存儲器總線端接、接地故障檢測、能量收集、小型引擎管理、處理器或芯片集專用電壓調節、負載突降保護、觸覺驅動器、熱電制冷器控制等。