Features

? STM32MP135FAF7 MPU with an Arm? Cortex??A7 32-bit processor at 1 GHz,

in a TFBGA320 package

? ST PMIC STPMIC1

? 4-Gbit DDR3L, 16 bits, 533 MHz

? 4.3 480×272 pixels LCD display module with capacitive touch panel and RGB

interface

? UXGA 2-megapixel CMOS camera module (included) with MIPI CSI-2? / SMIA

CCP2 deserializer

? Wi?Fi? 802.11b/g/n

? Bluetooth? Low Energy 4.1

? Dual 10/100 Mbit/s Ethernet (RMII) compliant with IEEE-802.3u, one with

Wake on LAN (WoL) support

? USB Host 4-port hub

? USB Type-C? DRP based on an STM32G0 device

? 4 user LEDs

? 4 push-buttons (2× user, tamper, and reset)

? 1 wake-up button

? Board connectors:

– Dual-lane MIPI CSI-2? camera module expansion

– 2× Ethernet RJ45

– 4× USB Type-A

– USB Micro-B

– USB Type-C?

– microSD? card holder

– GPIO expansion

– 5 V / 3 A USB Type-C? power supply input (charger not provided)

– VBAT for power backup

? On-board current measurement

? On-board STLINK-V3E debugger/programmer with USB re-enumeration

capability: mass storage, Virtual COM port, and debug port

? Full mainline open-source Linux? STM32 MPU OpenSTLinux Distribution

(such as STM32MP1Starter) software and examples

? Support of several Integrated Development Environments (IDEs) including

STM32CubeIDE

? Bare metal support for RTOS (Microsoft? Azure?)