STK672-630C-E屬于集成電路（IC）的電機驅動器控制器。由安森美半導體公司制造生產的STK672-630C-E電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。

Overview

The STK672-630C-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control.

特性 Features

? Built-in opened motor pin detection function (output current OFF).

? Built-in overcurrent detection function (output current OFF).

? Built-in overheat detection function (output current OFF).

? If opened motor pin, over-current, or overheat detection function is activated, the FAULT1 signal (active low) is output. The FAULT2 signal is used to output the result of activation of protection circuit detection at 3 levels.

? Built-in power on reset function.

? The motor speed is controlled by the frequency of an external clock signal.

? 2 phase or 1-2 phase excitation switching function.

? Using either or both edges of the clock signal switching function.

? Phase is maintained even when the excitation mode is switched.

? Rotational direction switching function.

? Supports schmitt input for 2.5V high level input.

? Incorporating a current detection resistor (0.141Ω: resistor tolerance ±2), motor current can be set using two external resistors.

? The ENABLE pin can be used to cut output current while maintaining the excitation mode.

? With a wide current setting range, power consumption can be reduced during standby.

? No motor sound is generated during hold mode due to external excitation current control.

Applications

? Office photocopiers, printers, etc.