描述 Description

該“逆變器 IPM”是一款高度集成的器件，在單個 SIP 模塊中包含了從 HV-DC 到 3 相輸出的所有高電壓 (HV) 控制。輸出級使用 IGBT / FRD 技術，實施了過電壓保護 (UVP) 和過電流保護 (OCP)，帶故障檢測輸出標志。為高壓側門極升壓驅動提供了內部升壓二極管。

特性 Features

? Protective circuits including over current (bus line) and pre-drive low voltage protection are built in.
? Fast speed protection is possible (Self protection)
? Direct input of CMOS level control signals without insulating circuits is possible. (Active HIGH)
? No need for optocoupler
? A single power supply drive is enabled through the use of bootstrap circuits for upper power supplies. (externally set)
? No need bootstrap diode and resistor at externally
? Built-in simultaneous upper/lower ON prevention circuit to prevent arm shorting through simultaneous ON input for the upper and lower side transistors.(Dead time is required for preventing shorting due to switching delay.)
? All IGBT Gate shutdown at abnormal for safety
? The level of the overcurrent protection current can be changed with the external resistor RSD between the ISD and VSS terminals.
? Can be customized by each application
? Monitoring substrate temperature is possible through the use of an internal thermistor.
? High precision monitor is possible
? Certification : UL Recognized (File number : E339285)

應用 Application

? 3-phase inverter motor
? Motor Control System
? Industrial / General Control System
? HVAC
? Clothes Washer / Dryer
? Dish Washer
? Refrigerator

簡介

STK531U369A-E屬于集成電路（IC）的全半橋驅動器。由制造生產的STK531U369A-E全半橋驅動器器件屬于電橋驅動器電源管理集成電路 (PMIC) 系列，包含兩個或多個功率晶體管，以及在外部器件控制下將其用作開關所需的電路。這些晶體管通常在內部配置為成對串聯連接（稱為半橋），因而任意指定晶體管對之間的結點都可以連接至兩個電源軌中的任一個。這類器件常用于將控制器件（如微控制器）提供的低電平信號轉換為操作執行器（如步進電機或無刷電機）所需的較大功率信號。