描述 Description

The chip is a fully integrated RF front-end able to down-convert the GPS L1 signal from 1575.42 MHz to 4.092 MHz.
The IF signal is converted by a two bit ADC. Sign (SIGN), Magnitude (MAG) and the 16.368 MHz sampling clock (GPS_CLK) are provided to the baseband.
The magnitude data is internally integrated in order to control the variable gain amplifiers in accordance to the RF input signal strength.
An excellent quality of reception in critical environments is ensured by the good noise figure and linearity of the receiver.
The on-chip oscillator supports crystal frequencies in the range of 10 MHz to 40 MHz. It is able to support TCXO providing also a buffered copy of the oscillator frequency.
The chip, using STMicroelectronics BiCMOS SiGe technology, is housed in a QFN-32 package.

特性 Features

? Low IF architecture (fIF= 4fO)
? Minimum external components
? VGA gain internally regulated
? On chip programmable PLL
? Typ. 2.7 V supply voltage
? SPI interface
? 2 kV HBM ESD protected
? Compatible with GPS L1
? Standard QFN-32 package
? Low power for portable designs

簡介

STA5620C屬于RF/IF射頻/中頻RFID的射頻接收器。由制造生產的STA5620C射頻接收器RF 接收器用于接收已調制的射頻信號并對其進行解調，然后將數據傳送到系統中進行處理。頻率范圍是 AM、FM、WB、0 Hz 至 64 GHz，數據速率為 250 bps 至 16 Gbps，數據接口包括連接器、I2C、I2S、引腳焊盤、并行、PCB、串行、焊盤、SPI、UART 和 USB。