PRODUCT DESCRIPTION

The SST36VF1601G and SST36VF1602G are 1M x16 or 2M x8 CMOS Concurrent Read/Write Flash Memory manufactured with SST proprietary, high performance CMOS SuperFlash memory technology. The split-gate cell design and thick oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The devices write (Program or Erase) with a 2.7-3.6V power supply and conform to JEDEC standard pinouts for x8/x16 memories.

FEATURES:

? Organized as 1M x16 or 2M x8

? Dual Bank Architecture for Concurrent

Read/Write Operation

– 16 Mbit Bottom Sector Protection

- SST36VF1601G: 4 Mbit + 12 Mbit

– 16 Mbit Top Sector Protection

- SST36VF1602G: 12 Mbit + 4 Mbit

? Single 2.7-3.6V for Read and Write Operations

? Superior Reliability

– Endurance: 100,000 cycles (typical)

– Greater than 100 years Data Retention

? Low Power Consumption:

– Active Current: 6 mA typical

– Standby Current: 4 μA typical

– Auto Low Power Mode: 4 μA typical

? Hardware Sector Protection/WP# Input Pin

– Protects the 4 outermost sectors (8 KWord)

in the smaller bank by driving WP# low and

unprotects by driving WP# high

? Hardware Reset Pin (RST#)

– Resets the internal state machine to reading

array data

? Byte# Pin

– Selects 8-bit or 16-bit mode

? Sector-Erase Capability

– Uniform 2 KWord sectors

? Chip-Erase Capability

? Block-Erase Capability

– Uniform 32 KWord blocks

? Erase-Suspend / Erase-Resume Capabilities

? Security ID Feature

– SST: 128 bits

– User: 256 Byte

? Fast Read Access Time

– 70 ns

? Latched Address and Data

? Fast Erase and Program (typical):

– Sector-Erase Time: 18 ms

– Block-Erase Time: 18 ms

– Chip-Erase Time: 35 ms

– Program Time: 7 μs

? Automatic Write Timing

– Internal VPP Generation

? End-of-Write Detection

– Toggle Bit

– Data# Polling

– Ready/Busy# pin

? CMOS I/O Compatibility

? Conforms to Common Flash Memory Interface (CFI)

? JEDEC Standards

– Flash EEPROM Pinouts and command sets

? Packages Available

– 48-ball TFBGA (6mm x 8mm)

– 48-lead TSOP (12mm x 20mm)

– 56-ball LFBGA (8mm x 10mm)

? All non-Pb (lead-free) devices are RoHS compliant