DESCRIPTION

The SP3244E/3245E is a 3-driver/5-receiver device ideal for mobile phone, consumer and PDA applications. These devices use an internal high-efficiency, charge-pump power supply that requires only 0.1μF capacitors for 3.3V single-supply operation. This charge pump and Sipex’s driver architecture allow the SP3244E/3245E to deliver compliant RS-232 performance from a power supply ranging from +3.0V to +5.5V. At voltages between +2.7V and +3.0V the driver outputs are compliant with RS-562 and can interface to RS-232 in portable applications.

FEATURES

? Contains 3-Drivers and 5-Receivers;

Single-chip DTE (PC or terminal) serial port transceiver

? Auto On-line? Plus

? SP3244E slew-controlled to 250Kbps under load

? SP3245E 1Mbps data rate for high-speed RS-232

? Meets true EIA/TIA-232-F and ITU V.28 standards from a +3.0V to +5.5V power supply

? Adheres to EIA/TIA-562 for interoperability with EIA/TIA-232 down to a +2.7V supply voltage

? Regulated charge pump yields stable RS-232 outputs regardless of VCC variations

? ESD Specifications:

±15KV Human Body Model

±15KV IEC1000-4-2 Air Discharge

± 8KV IEC1000-4-2 Contact Discharge

APPLICATIONS

? Portable RS-232

? Laptops and handheld PCs and PDA

? Cellular telephones, datacables, chargingcradles

? Diagnostic/upload ports on embedded applications

? Use in conjunction with low-voltage UART or microcontroller

? SP3244E is cross-compatible with MAX3244E, ICL3244E

? SP3245E is cross-compatible with MAX3245E, ICL3245E