SN75ALS199DR屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的SN75ALS199DR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Meets or Exceeds the Requirements of ITU

Recommendations V.10, V.11, X.26, and

X.27

Designed to Operate Up To 20 Mbaud

–7 V to 7 V Common-Mode Input Voltage

Range With 300-mV Sensitivity

3-State TTL-Compatible Outputs

High Input Impedance . . . 12 kW Min

Input Hysteresis . . . 120 mV Typ

Single 5-V Supply Operation

Low Supply Current Requirement

35 mA Max

Improved Speed and Power Consumption

Compared to MC3486

description

The SN75ALS199 is a monolithic, quadruple line receiver with 3-state outputs designed using advanced,

low-power, Schottky technology. This technology provides combined improvements in bar design, tooling

production, and wafer fabrication, providing significantly less power consumption and permitting much higher

data throughput than other designs. The device meets the specification of ITU Recommendations V.10, V.11,

X.26, and X.27.

The SN75ALS199 features 3-state outputs that permit direct connection to a bus-organized system with a

fail-safe design that ensures the ouptuts will always be high if the inputs are open. The device is optimized for

balanced multipoint bus transmission at rates up to 20 megabits per second. The input features high-input

impedance, input hysteresis for increased noise immunity, and an input sensitivity of ±300 mV over a

common-mode input voltage range of ±7 V. It also features an active-high enable function for each of two

receiver pairs. The SN75ALS199 is designed for optimum performance when used with the SN75ALS194

quadruple, differential line driver.

The SN75ALS199 is characterized for operation from 0°C to 70°C.