SN75ALS160屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的SN75ALS160驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Suitable for IEEE Standard 488-1978 (GPIB)

8-Channel Bidirectional Transceivers

High-Speed Advanced Low-Power Schottky

(ALS) Circuitry

Low Power Dissipation

. . . 46 mW Max Per Channel

Fast Propagation Times . . . 20 ns Max

High-Impedance pnp Inputs

Receiver Hysteresis . . . 650 mV Typ

Open-Collector Driver Output Option

No Loading of Bus When Device Is

Powered Down (VCC = 0)

Power-Up/Power-Down Protection

(Glitch Free)

description/ordering information

The SN75ALS160 eight-channel general-purpose interface bus transceivers are monolithic, high-speed,

advanced low-power Schottky (ALS) devices designed for two-way data communications over single-ended

transmission lines. This device is designed to meet the requirements of IEEE Standard 488-1978. The

transceivers feature driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk

enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is

low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The

driver outputs are designed to handle loads up to 48 mA of sink current.

An active turn-off feature has been incorporated into the bus-terminating resistors so that the device exhibits

a high impedance to the bus when VCC = 0. When combined with the SN75ALS161 or SN75ALS162 bus

management transceiver, the pair provides the complete 16-wire interface for the IEEE-488 bus.

The SN75ALS160 is characterized for operation from 0°C to 70°C.