SN75160BDW屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的SN75160BDW驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

Meets IEEE Standard 488-1978 (GPIB)

8-Channel Bidirectional Transceiver

Power-Up/Power-Down Protection

(Glitch Free)

High-Speed, Low-Power Schottky Circuitry

Low Power Dissipation . . . 72 mW Max Per

Channel

Fast Propagation Times . . . 22 ns Max

High-Impedance pnp Inputs

Receiver Hysteresis . . . 650 mV Typ

Open-Collector Driver Output Option

No Loading of Bus When Device Is

Powered Down (VCC = 0)

description

The SN75160B 8-channel general-purpose interface bus (GPIB) transceiver is a monolithic, high-speed,

low-power Schottky device designed for two-way data communications over single-ended transmission lines.

It is designed to meet the requirements of IEEE Standard 488-1978. The transceiver features driver outputs that

can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the

characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high.

Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads

up to 48 mA of sink current.

Output glitches during power up and power down are eliminated by an internal circuit that disables both the bus

and receiver outputs. The outputs do not load the bus when VCC = 0. When combined with the SN75161B or

SN75162B management bus transceivers, the pair provides the complete 16-wire interface for the IEEE-488

bus.

The SN75160B is characterized for operation from 0°C to 70°C.