首頁>SN75154NSR.A>規格書詳情
SN75154NSR.A中文資料德州儀器數據手冊PDF規格書
SN75154NSR.A規格書詳情
Meets or Exceeds the Requirements of
ANSI Standard EIA/TIA-232-E and ITU
Recommendation V.28
Input Resistance . . . 3 kW to 7 kW Over Full
EIA/TIA-232-E Voltage Range
Input Threshold Adjustable to Meet
Fail-Safe Requirements Without Using
External Components
Built-In Hysteresis for Increased Noise
Immunity
Inverting Output Compatible With TTL
Output With Active Pullup for Symmetrical
Switching Speeds
Standard Supply Voltages . . . 5 V or 12 V
description
The SN75154 is a monolithic low-power Schottky line receiver designed to satisfy the requirements of the
standard interface between data terminal equipment and data communication equipment as defined by ANSI
Standard EIA/TIA-232-E. Other applications are for relatively short, single-line, point-to-point data transmission
and for level translators. Operation is normally from a single 5-V supply; however, a built-in option allows
operation from a 12-V supply without the use of additional components. The output is compatible with most TTL
circuits when either supply voltage is used.
In normal operation, the threshold-control terminals are connected to the VCC1 terminal, even if power is being
supplied via the alternate VCC2 terminal. This provides a wide hysteresis loop, which is the difference between
the positive-going and negative-going threshold voltages. See typical characteristics. In this mode of operation,
if the input voltage goes to zero, the output voltage will remain at the low or high level as determined by the
previous input.
For fail-safe operation, the threshold-control terminals are open. This reduces the hysteresis loop by causing
the negative-going threshold voltage to be above zero. The positive-going threshold voltage remains above
zero as it is unaffected by the disposition of the threshold terminals. In the fail-safe mode, if the input voltage
goes to zero or an open-circuit condition, the output will go to the high level regardless of the previous input
condition.
The SN75154 is characterized for operation from 0°C to 70°C.
供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
---|---|---|---|---|---|---|---|
TI |
23+ |
SOP8 |
3200 |
正規渠道,只有原裝! |
詢價 | ||
TexasInstruments |
18+ |
ICQUADDIFFLINERCVR16SO |
6800 |
公司原裝現貨/歡迎來電咨詢! |
詢價 | ||
TI |
22+ |
NA |
500000 |
萬三科技,秉承原裝,購芯無憂 |
詢價 | ||
TI |
20+ |
NA |
53650 |
TI原裝主營-可開原型號增稅票 |
詢價 | ||
TI |
22+ |
SOP8 |
5000 |
只做原裝,假一賠十 |
詢價 | ||
TI/德州儀器 |
22+ |
SOP-8 |
3000 |
原裝正品,支持實單 |
詢價 | ||
TI |
25+ |
SO16 |
4500 |
全新原裝、誠信經營、公司現貨銷售! |
詢價 | ||
TI |
23+ |
SOP |
7566 |
原廠原裝 |
詢價 | ||
TI |
24+ |
DIP |
3378 |
絕對原裝公司現貨供應!價格優勢 |
詢價 | ||
TI |
24+ |
SO16 |
364 |
詢價 |