Member of the Texas Instruments

Widebus? Family

Operates From 2.7 V to 3.6 V

Inputs Accept Voltages to 5.5 V

Max tpd of 4.1 ns at 3.3 V

Ioff and Power-Up 3-State Support Hot

Insertion

Supports Mixed-Mode Signal Operation on

All Ports (5-V Input/Output Voltage With

3.3-V VCC)

Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 1000-V Charged-Device Model (C101)

description/ordering information

This 16-bit buffer/driver is designed for 2.7-V to

3.6-V VCC operation.

The SN74LVCZ16244A is designed specifically to

improve the performance and density of 3-state

memory address drivers, clock drivers, and

bus-oriented receivers and transmitters.

The device can be used as four 4-bit buffers, two

8-bit buffers, or one 16-bit buffer. It provides true

outputs.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators

in a mixed 3.3-V/5-V system environment.

During power up or power down when VCC is between 0 and 1.5 V, the device is in the high-impedance state.

However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor;

the minimum value of the resistor is determined by the current-sinking capability of the driver.