SN74LVCR16245ADGGR屬于集成電路（IC）的緩沖器驅動器接收器收發器。由美國德州儀器公司制造生產的SN74LVCR16245ADGGR緩沖器，驅動器，接收器，收發器邏輯緩沖器、驅動器、接收器和收發器允許隔離對某個電路的邏輯信號的訪問，以用于另一電路。緩沖器將其輸入信號（不變或反相）傳遞到其輸出，并可能用于清除弱信號或驅動負載。在布爾邏輯仿真器中，緩沖器主要用于增加傳播延遲。邏輯接收器和收發器允許在數據總線之間進行隔離通信。

1 Features

1? Member of the Texas Instruments

Widebus? Family

? Operates From 1.65 V to 3.6 V

? Inputs Accept Voltages to 5.5 V

? Max tpd of 4.8 ns at 3.3 V

? Typical VOLP (Output Ground Bounce)

<0.8 V at VCC = 3.3 V, TA = 25°C

? Typical V OHV (Output VOH Undershoot)

>2 V at VCC = 3.3 V, TA = 25°C

? Supports Mixed-Mode Signal Operation on All

Ports (5-V Input/Output Voltage With 3.3-V VCC)

? All Inputs and Outputs Have Equivalent 26-Ω

Series Resistors, So No External Resistors Are

Required

? I off Supports Live Insertion, Partial-Power-Down

Mode, and Back-Drive Protection

? Latch-Up Performance Exceeds 250 mA Per

JESD 17

? ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

2 Applications

? Servers

? PCs and Notebooks

? Network Switches

? Telecom Infrastructures

3 Description

This 16-bit (dual-octal) noninverting bus transceiver is

designed for 1.65-V to 3.6-V VCC operation.

The SN74LVCR16245A device is designed for

asynchronous communication between data buses.

All inputs and outputs have equivalent 26-Ω resistors

that will slow the edges of the output and reduce

switching noise caused by long capacitive etch runs

or cables.

This device can be used as two 8-bit transceivers or

one 16-bit transceiver. Active bus-hold circuitry holds

unused or undriven data inputs at a valid logic state.