SN74LVC2G241DCUR屬于集成電路（IC）的緩沖器驅動器接收器收發器。由美國德州儀器公司制造生產的SN74LVC2G241DCUR緩沖器，驅動器，接收器，收發器邏輯緩沖器、驅動器、接收器和收發器允許隔離對某個電路的邏輯信號的訪問，以用于另一電路。緩沖器將其輸入信號（不變或反相）傳遞到其輸出，并可能用于清除弱信號或驅動負載。在布爾邏輯仿真器中，緩沖器主要用于增加傳播延遲。邏輯接收器和收發器允許在數據總線之間進行隔離通信。

1 Features

1? Available in the Texas Instruments

NanoFree? Package

? Supports 5-V VCC Operation

? Inputs Accept Voltages to 5.5 V

? Max tpd of 4.1 ns at 3.3 V

? Low Power Consumption, 10-μA Maximum ICC

? ±24-mA Output Drive at 3.3 V

? Typical VOLP (Output Ground Bounce)

<0.8 V at VCC = 3.3 V, TA = 25°C

? Typical VOHV (Output VOH Undershoot)

>2 V at VCC = 3.3 V, TA = 25°C

? Ioff Supports Live Insertion, Partial-Power-Down

Mode, and Back-Drive Protection

? Can Be Used as a Down Translator to Translate

Inputs From a Max of 5.5 V Down

to the VCC Level

? Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

? ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

2 Applications

? AV Receivers

? Blu-ray Players and Home Theaters

? DVD Recorders and Players

? Desktop or Notebook PCs

? Digital Radio or Internet Radio Players

? Digital Video Cameras (DVC)

? Embedded PCs

? GPS: Personal Navigation Devices

? Mobile Internet Devices

? Network Projector Front-Ends

? Portable Media Players

? Pro Audio Mixers

3 Description

This dual buffer and line driver is designed for 1.65-V

to 5.5-V VCC operation.

The SN74LVC2G241 device is designed specifically

to improve both the performance and density of 3-

state memory-address drivers, clock drivers, and busoriented

receivers and transmitters.

NanoFree package technology is a major

breakthrough in IC packaging concepts, using the die

as the package.

The SN74LVC2G241 device is organized as two 1-bit

line drivers with separate output-enable (1OE, 2OE)

inputs. When 1OE is low and 2OE is high, the device

passes data from the A inputs to the Y outputs. When

1OE is high and 2OE is low, the outputs are in the

high-impedance state.

To ensure the high-impedance state during power up

or power down, OE should be tied to VCC through a

pullup resistor, and OE should be tied to GND

through a pulldown resistor; the minimum value of the

resistor is determined by the current-sinking or the

current-sourcing capability of the driver.

This device is fully specified for partial-power-down

applications using Ioff. The Ioff circuitry disables the

outputs, preventing damaging current backflow

through the device when it is powered down.