SN74LVC161284DL屬于集成電路（IC）的專用邏輯器件。由美國德州儀器公司制造生產(chǎn)的SN74LVC161284DL專用邏輯器件專用邏輯 IC 設(shè)計提供應用特定的邏輯輸出類型，例如 BCD 速率倍增、可尋址掃描端口、總線終端陣列、CML 驅(qū)動器、比較器、ABT 掃描測試、二進制全加法器、互補對加逆變器、可配置緩沖器、觸點顫動消除器、晶體振蕩器、延遲元件、差分接收器、LVTTL 到 GTLP 收發(fā)器、存儲器解碼器、電源良好檢測器和分頻器。

1.4-kΩ Pullup Resistors Integrated on All

Open-Drain Outputs Eliminate the Need for

Discrete Resistors

ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

Designed for the IEEE Std 1284-I (Level 1

Type) and IEEE Std 1284-II (Level 2 Type)

Electrical Specifications

Flow-Through Architecture Optimizes PCB

Layout

Package Options Include Plastic 300-mil

Shrink Small-Outline (DL) and Thin-Shrink

Small-Outline (DGG) Packages

description/ordering information

The SN74LVC161284 is designed for 3-V to 3.6-V

VCC operation. This device provides

asynchronous two-way communication between

data buses. The control-function implementation

minimizes external timing requirements.

This device has eight bidirectional bits; data can

flow in the A-to-B direction when DIR is high and

in the B-to-A direction when DIR is low. This

device also has five drivers, which drive the cable

side, and four receivers. The SN74LVC161284

has one receiver dedicated to the HOST LOGIC

line and a driver to drive the PERI LOGIC line.

The output drive mode is determined by the high-drive (HD) control pin. When HD is high, the outputs are in

a totem-pole configuration, and in an open-drain configuration when HD is low. This meets the drive

requirements as specified in the IEEE Std 1284-I (level 1 type) and IEEE Std 1284-II (level 2 type) parallel

peripheral-interface specifications. Except for HOST LOGIC IN and PERI LOGIC OUT, all cable-side pins have

a 1.4-kΩ integrated pullup resistor. The pullup resistor is switched off if the associated output driver is in the low

state or if the output voltage is above VCC CABLE. If VCC CABLE is off, PERI LOGIC OUT is set to low.

The device has two supply voltages. VCC is designed for 3-V to 3.6-V operation. VCC CABLE supplies the inputs

and output buffers of the cable side only and is designed for 3-V to 3.6-V and for 4.7-V to 5.5-V operation. Even

when VCC CABLE is 3 V to 3.6 V, the cable-side I/O pins are 5-V tolerant.

The SN74LVC161284 is characterized for operation from 0°C to 70°C.