最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

SN74CBT3125C

具有 –2V 下沖保護的 5V、1:1 (SPST)、4 通道 FET 總線開關; ? Undershoot Protection for Off-Isolation on A and B Ports Up To –2 V\n? Bidirectional Data Flow, With Near-Zero Propagation Delay\n? Low On-State Resistance (ron) Characteristics ????? (ron = 3 Typical)\n? Low Input/Output Capacitance Minimizes Loading and Signal Distortion ?????(Cio(OFF) = 5 pF Typical)\n? Data and Control Inputs Provide Undershoot Clamp Diodes\n? Low Power Consumption ?????(ICC = 3 μA Max)\n? VCC Operating Range From 4 V to 5.5 V\n? Data I/Os Support 0 to 5-V Signaling Levels (0.8-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V)\n? Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs\n? Ioff Supports Partial-Power-Down Mode Operation\n? Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II\n? ESD Performance Tested Per JESD 22 \n? 2000-V Human-Body Model (A114-B, Class II)\n? 1000-V Charged-Device Model (C101)\n \n? Supports Both Digital and Analog Applications: USB Interface, Bus Isolation, Low-Distortion Signal Gating;

The SN74CBT3125C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3125C provides protection for undershoot up to ?2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.\n\n The SN74CBT3125C is organized as four 1-bit bus switches with separate output-enable (1OE\\, 2OE\\, 3OE\\, 4OE\\) inputs. It can be used as four 1-bit bus switches or as one 4-bit bus switch. When OE\\ is low, the associated 1-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\\ is high, the associated 1-bit bus switch is OFF, and the high-impedance state exists between the A and B ports.\n\n This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down.\n\n To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

SN74CBT3125C

QUADRUPLE FET BUS SWITCH 5-VBUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

SN74CBT3125C

QUADRUPLE FET BUS SWITCH 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

SN74CBT3125C_08

QUADRUPLE FET BUS SWITCH 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

SN74CBT3125C_15

QUADRUPLE FET BUS SWITCH 5-V BUS SWITCH-2-V UNDERSHOOT PROTECTION

SN74CBT3125CD

QUADRUPLE FET BUS SWITCH 5-VBUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

SN74CBT3125CD

QUADRUPLE FET BUS SWITCH 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

SN74CBT3125CD

QUADRUPLE FET BUS SWITCH 5-V BUS SWITCH-2-V UNDERSHOOT PROTECTION

SN74CBT3125CDB

QUADRUPLE FET BUS SWITCH 5-VBUS SWITCH WITH -2-V UNDERSHOOT PROTECTION

SN74CBT3125CDB

QUADRUPLE FET BUS SWITCH 5-V BUS SWITCH WITH -2-V UNDERSHOOT PROTECTION