描述 Description

The SN74CB3Q16211 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device also features low data I/O capacitance to minimize capacitive loading and signal distortion on the data bus. Specifically designed to support high-bandwidth applications, the SN74CB3Q16211 provides an optimized interface solution ideally suited for broadband communications, networking, and data-intensive computing systems. The SN74CB3Q16211 is organized as two 12-bit bus switches with separate output-enable (1OE\\, 2OE\\) inputs. It can be used as two 12-bit bus switches or as one 24-bit bus switch. When OE\\ is low, the associated 12-bit bus switch is ON and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\\ is high, the associated 12-bit bus switch is OFF, and a high-impedance state exists between the A and B ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry prevents damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE\\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

特性 Features

? Member of the Texas Instruments Widebus? Family
? High-Bandwidth Data Path (Up To 500 MHz)
? 5-V Tolerant I/Os with Device Powered Up or Powered Down
? Low and Flat ON-State Resistance (ron) Characteristics Over Operating Range (ron = 5 Typical)
? Rail-to-Rail Switching on Data I/O Ports
? 0-V to 5-V Switching With 3.3-V VCC
? 0-V to 3.3-V Switching With 2.5-V VCC

? Bidirectional Data Flow, With Near-Zero Propagation Delay
? Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(OFF) = 4 pF Typical)
? Fast Switching Frequency (fOE\\ = 20 MHz Max)
? Data and Control Inputs Provide Undershoot Clamp Diodes
? Low Power Consumption (ICC = 1 mA Typical)
? VCC Operating Range From 2.3 V to 3.6 V
? Data I/Os Support 0-V to 5-V Signaling Levels (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V)
? Control Inputs Can be Driven by TTL or 5-V/3.3-V CMOS Outputs
? Ioff Supports Partial-Power-Down Mode Operation
? Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
? ESD Performance Tested Per JESD 22
? 2000-V Human-Body Model (A114-B, Class II)
? 1000-V Charged-Device Model (C101)

? Supports Both Digital and Analog Applications: PCI Interface, Differential Signal Interface, Memory Interleaving, Bus Isolation, Low-Distortion Signal Gating
For additional information regarding the performance characteristics of the CB3Q family, refer to the TI application report, CBT-C, CB3T, and CB3Q Signal-Switch Families, literature number SCDA008. Widebus is a trademark of Texas Instruments.