FEATURES

· Member of the Texas Instruments Widebus?

Family

· DOC? (Dynamic Output Control) Circuit

Dynamically Changes Output Impedance,

Resulting in Noise Reduction Without Speed

Degradation

· Less Than 2-ns Maximum Propagation Delay

at 2.5-V and 3.3-V VCC

· Dynamic Drive Capability Is Equivalent to

Standard Outputs With IOH and IOL of ±24 mA

at 2.5-V VCC

· Overvoltage-Tolerant Inputs/Outputs Allow

Mixed-Voltage-Mode Data Communications

· Ioff Supports Partial-Power-Down Mode

Operation

· Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

· ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

DESCRIPTION/ORDERING INFORMATION

A Dynamic Output Control (DOC) circuit is implemented, which, during the transition, initially lowers the output

impedance to effectively drive the load and, subsequently, raises the impedance to reduce noise. Figure 1 shows

typical VOL vs IOL and VOH vs IOH curves to illustrate the output impedance and drive capability of the circuit. At

the beginning of the signal transition, the DOC circuit provides a maximum dynamic drive that is equivalent to a

high-drive standard-output device. For more information, refer to the TI application reports, AVC Logic Family

Technology and Applications, literature number SCEA006, and Dynamic Output Control (DOC?) Circuitry

Technology and Applications, literature number SCEA009.