1 Features

1? Qualified for Automotive Applications

– AEC-Q100 Qualified

– Device Temperature Grade 1: –40°C to 125°C

Ambient Operating Temperature

– Device HBM ESD Classification Level 3A

– Device CDM ESD Classification Level C5

? Wide Operating VCC Range of 0.9 V to 3.6 V

? Balanced Propagation Delays: tPLH = tPHL

(1.8-V to 3.3-V Translation Typical)

? Low Static-Power Consumption: Maximum of 5-μA

ICC

? ±6-mA Output Drive at 3 V

? Ioff Supports Partial Power-Down-Mode Operation

? VCC Isolation Feature – If VCCA Input Is at GND,

B Port Is in the High-Impedance state

? Input Hysteresis Allows Slow Input Transition and

Better Switching Noise Immunity at Input

? ESD Protection Exceeds JESD 22

? 5000-V Human-Body Model (AEC-Q100-002-E)

? Latch-Up Performance Meets

100 mA Per Q100-004-D

2 Applications

? Automotive

? Enterprise

? Industrial

? Personal Electronics

? Telecommunications

3 Description

The SN74AUP1T34-Q1 device is a 1-bit noninverting

translator that uses two separate configurable powersupply

rails. It is a unidirectional translator from A to

B. The A port is designed to track VCCA. VCCA accepts

supply voltages from 0.9 V to 3.6 V. The B port is

designed to track VCCB. VCCB accepts supply voltages

from 0.9 V to 3.6 V. This allows for low-voltage

translation between 1-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V,

and 3.3-V voltage nodes. The SN74AUP1T34-Q1 is

also fully specified for partial-power-down

applications using Ioff. The Ioff circuitry disables the

outputs, preventing damaging current backflow

through the device when it is powered down.

The VCC isolation feature ensures that if VCCA input

is at GND, the B port is in the high-impedance state.

If VCCB input is at GND, any input to the A side does

not cause the leakage current even floating.