SN74AUP1T00DCKR屬于集成電路（IC）的門反相器。由美國德州儀器公司制造生產的SN74AUP1T00DCKR門和反相器邏輯柵極和逆變器系列中的產品對單個邏輯信號執行基本邏輯運算（例如 AND、NOT、OR 等）。與觸發器不同，它們不能夠存儲信息，不會對提供給其輸入的信號立即做出響應。雖然早就被集成電路實施形式所取代，以用于實現復雜功能，但分立柵極仍可在僅需要非常簡單邏輯功能的情況下使用。

1FEATURES

? Single-Supply Voltage Translator

? Output Level Up to Supply VCC CMOS Level

– 1.8 V to 3.3 V (at VCC = 3.3 V)

– 2.5 V to 3.3 V (at VCC = 3.3 V)

– 1.8 V to 2.5 V (at V CC = 2.5 V)

– 3.3 V to 2.5 V (at V CC = 2.5 V

? Schmitt-Trigger Inputs Reject Input Noise and

Provide Better Output Signal Integrity

? Ioff Supports Partial Power Down (VCC = 0 V)

? Very Low Static Power Consumption:

0.1 μA

? Very Low Dynamic Power Consumption:

0.9 μA

? Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

? Pb-Free Packages Available: SC-70 (DCK)

2 x 2.1 x 0.65 mm (Height 1.1 mm)

? More Gate Options Available at

www.ti.com/littlelogic

? ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

The SN74AUP1T00 performs the Boolean function Y = A ● B or Y = A + B with designation for logic-level

translation applications with output referenced to supply VCC.

AUP technology is the industry's lowest-power logic technology designed for use in extending battery-life in

operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V

VCC supply. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).

The wide VCC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external

controllers or processors.

Schmitt-trigger inputs (ΔVT = 210 mV between positive and negative input transitions) offer improved noise

immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger

inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition.

Ioff is a feature that allows for powered-down conditions (VCC = 0 V) and is important in portable and mobile

applications. When VCC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of

the device. No damage occurs to the device under these conditions.

The SN74AUP1T00 is designed with optimized current-drive capability of 4 mA to reduce line reflections,

overshoot, and undershoot caused by high-drive outputs.