SN74AUP1T00屬于集成電路（IC）的門反相器。由美國德州儀器公司制造生產的SN74AUP1T00門和反相器邏輯柵極和逆變器系列中的產品對單個邏輯信號執(zhí)行基本邏輯運算（例如 AND、NOT、OR 等）。與觸發(fā)器不同，它們不能夠存儲信息，不會對提供給其輸入的信號立即做出響應。雖然早就被集成電路實施形式所取代，以用于實現(xiàn)復雜功能，但分立柵極仍可在僅需要非常簡單邏輯功能的情況下使用。

1FEATURES

? Single-Supply Voltage Translator

? Output Level Up to Supply VCC CMOS Level

– 1.8 V to 3.3 V (at VCC = 3.3 V)

– 2.5 V to 3.3 V (at VCC = 3.3 V)

– 1.8 V to 2.5 V (at V CC = 2.5 V)

– 3.3 V to 2.5 V (at V CC = 2.5 V

? Schmitt-Trigger Inputs Reject Input Noise and

Provide Better Output Signal Integrity

? Ioff Supports Partial Power Down (VCC = 0 V)

? Very Low Static Power Consumption:

0.1 μA

? Very Low Dynamic Power Consumption:

0.9 μA

? Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

? Pb-Free Packages Available: SC-70 (DCK)

2 x 2.1 x 0.65 mm (Height 1.1 mm)

? More Gate Options Available at

www.ti.com/littlelogic

? ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

The SN74AUP1T00 performs the Boolean function Y = A ● B or Y = A + B with designation for logic-level

translation applications with output referenced to supply VCC.

AUP technology is the industry's lowest-power logic technology designed for use in extending battery-life in

operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V

VCC supply. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).

The wide VCC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external

controllers or processors.

Schmitt-trigger inputs (ΔVT = 210 mV between positive and negative input transitions) offer improved noise

immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger

inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition.

Ioff is a feature that allows for powered-down conditions (VCC = 0 V) and is important in portable and mobile

applications. When VCC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of

the device. No damage occurs to the device under these conditions.

The SN74AUP1T00 is designed with optimized current-drive capability of 4 mA to reduce line reflections,

overshoot, and undershoot caused by high-drive outputs.