FEATURES

· Available in the Texas Instruments

NanoFree? Package

· Optimized for 1.8-V Operation and Is 3.6-V I/O

Tolerant to Support Mixed-Mode Signal

Operation

· Ioff Supports Partial-Power-Down Mode

Operation

· Sub-1-V Operable

· Max tpd of 1.9 ns at 1.8 V

· Low Power Consumption, 10 mA at 1.8 V

· ±8-mA Output Drive at 1.8 V

· Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

· ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

This dual bus buffer gate is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V

VCC operation.

The SN74AUC2G126 is a dual bus driver/line driver with 3-state outputs. The outputs are disabled when the

associated output-enable (OE) input is low.

NanoFree? package technology is a major breakthrough in IC packaging concepts, using the die as the

package.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a

pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the

driver.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.

For more information about AUC Little Logic devices, please refer to the TI application report, Applications of

Texas Instruments AUC Sub-1-V Little Logic Devices, literature number SCEA027.