SN74ALVCH16823屬于集成電路（IC）的觸發器。由美國德州儀器公司制造生產的SN74ALVCH16823觸發器觸發器是能夠存儲單個邏輯狀態或信息“位”的基本數字存儲器件。這些器件至少有兩個輸入；一個或多個用于傳遞要存儲的數據，另一個用于指示存儲該數據的時間點。不同的觸發器類型，例如 D（延遲）、SR（置位復位）和 JK，對提供給其輸入的信號有不同的響應，可用于實現不同的邏輯功能。這些器件與鎖存器的不同之處在于它們是邊緣敏感器件，其保持的邏輯狀態僅在接收到有效時鐘信號時才會改變。

FEATURES

· Member of the Texas Instruments Widebus?

Family

· EPIC? (Enhanced-Performance Implanted

CMOS) Submicron Process

· ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

· Latch-Up Performance Exceeds 250 mA Per

JESD 17

· Bus Hold on Data Inputs Eliminates the Need

for External Pullup/Pulldown Resistors

· Package Options Include Plastic 300-mil

Shrink Small-Outline (DL) and Thin Shrink

Small-Outline (DGG) Packages

DESCRIPTION

This 18-bit bus-interface flip-flop is designed for

1.65-V to 3.6-V VCC operation.

The SN74ALVCH16823 features 3-state outputs

designed specifically for driving highly capacitive or

relatively low-impedance loads. This device is

particularly suitable for implementing wider buffer

registers, I/O ports, bidirectional bus drivers with

parity, and working registers.

The SN74ALVCH16823 can be used as two 9-bit

flip-flops or one 18-bit flip-flop. With the clock-enable

(CLKEN) input low, the D-type flip-flops enter data on

the low-to-high transitions of the clock. Taking

CLKEN high disables the clock buffer, thus latching

the outputs. Taking the clear (CLR) input low causes

the Q outputs to go low independently of the clock.

A buffered output-enable (OE) input can be used to place the nine outputs in either a normal logic state (high or

low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the

bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines

without need for interface or pullup components.

The output-enable (OE) input does not affect the internal operation of the flip-flops. Old data can be retained or

new data can be entered while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

The SN74ALVCH16823 is characterized for operation from –40°C to 85°C.