SN74AHC245QPWR屬于集成電路（IC）的緩沖器驅動器接收器收發器。由美國德州儀器公司制造生產的SN74AHC245QPWR緩沖器，驅動器，接收器，收發器邏輯緩沖器、驅動器、接收器和收發器允許隔離對某個電路的邏輯信號的訪問，以用于另一電路。緩沖器將其輸入信號（不變或反相）傳遞到其輸出，并可能用于清除弱信號或驅動負載。在布爾邏輯仿真器中，緩沖器主要用于增加傳播延遲。邏輯接收器和收發器允許在數據總線之間進行隔離通信。

Q Devices Meet Automotive Performance

Requirements

Customer-Specific Configuration Control

Can Be Supported Along With

Major-Change Approval

Operating Range 2-V to 5.5-V VCC

Latch-Up Performance Exceeds 250 mA Per

JESD 17

description

The SN74AHC245Q octal bus transceiver is

designed for asynchronous two-way

communication between data buses. The

control-function implementation minimizes

external timing requirements.

This device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on

the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the

device so that the buses are effectively isolated.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.