SN74AHC244MPWREPG4屬于集成電路（IC）的緩沖器驅動器接收器收發器。由美國德州儀器公司制造生產的SN74AHC244MPWREPG4緩沖器，驅動器，接收器，收發器邏輯緩沖器、驅動器、接收器和收發器允許隔離對某個電路的邏輯信號的訪問，以用于另一電路。緩沖器將其輸入信號（不變或反相）傳遞到其輸出，并可能用于清除弱信號或驅動負載。在布爾邏輯仿真器中，緩沖器主要用于增加傳播延遲。邏輯接收器和收發器允許在數據總線之間進行隔離通信。

Controlled Baseline

– One Assembly/Test Site, One Fabrication

Site

Extended Temperature Performance of

–55°C to 125°C

Enhanced Diminishing Manufacturing

Sources (DMS) Support

Enhanced Product-Change Notification

Qualification Pedigree?

EPIC? (Enhanced-Performance Implanted

CMOS) Process

Operating Range 2-V to 5.5-V VCC

Latch-Up Performance Exceeds 250 mA Per

JESD 17

ESD Protection Exceeds 1500 V Per

MIL-STD-833, Method 3015; Exceeds 150 V

Using Machine Model (C = 200 pF, R = 0)

description/ordering information

This octal buffer/driver is designed specifically to improve the performance and density of 3-state

memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.

The SN74AHC244 is organized as two 4-bit buffers/line drivers with separate output-enable (OE) inputs. When

OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the

high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.