最新无码a∨在线观看,一本av高清一区二区三区,亚洲熟妇色l20p,宅男噜噜69av,中出あ人妻熟女中文字幕

SN74ABTH182502A

具有 18 位通用總線收發(fā)器的掃描測試設備; ? Members of the Texas Instruments SCOPETM Family ofTestability Products? Members of the Texas Instruments WidebusTM Family? Compatible With the IEEE Standard 1149.1-1990 (JTAG) TestAccess Portand Boundary-Scan Architecture? UBTTM (Universal Bus Transceiver) Combines D-TypeLatches and D-Type Flip-Flops for Operation in Transparent,Latched, or Clocked Mode? Bus Hold on Data Inputs Eliminates the Need for ExternalPullup Resistors? B-Port Outputs of 'ABTH182502A Devices Have Equivalent 25-SeriesResistors, So No External Resistors Are Required? State-of-the-Art EPIC-IIBTM BiCMOS Design? One Boundary-Scan Cell Per I/O Architecture Improves ScanEfficiency? SCOPE Instruction Set? IEEE Standard 1149.1-1990 Required Instructions and Optional CLAMP and HIGHZ? Parallel-Signature Analysis at Inputs? Pseudo-Random Pattern Generation From Outputs? Sample Inputs/Toggle Outputs? Binary Count From Outputs? Device Identification? Even-Parity Opcodes? Packaged in 64-Pin Plastic Thin Quad Flat (PM) Packages Using0.5-mm Center-to-Center Spacings and 68-Pin Ceramic Quad Flat (HV)Packages Using 25-mil Center-to-Center SpacingsSCOPE, Widebus, UBT, and EPIC-IIB are trademarks ofTexas Instruments Incorporated.;

The 'ABTH18502A and 'ABTH182502A scan test devices with 18-bit universal bus transceivers are members of the Texas Instruments SCOPE testability integrated-circuit family. This family of devices supports IEEE Standard 1149.1-1990 boundary scan to facilitate testing of complex circuit-board assemblies. Scan access to the test circuitry is accomplished via the 4-wire test access port (TAP) interface.\nIn the normal mode, these devices are 18-bit universal bus transceivers that combine D-type latches and D-type flip-flops to allow data flow in transparent, latched, or clocked modes. They can be used either as two 9-bit transceivers or one 18-bit transceiver. The test circuitry can be activated by the TAP to take snapshot samples of the data appearing at the device pins or to perform a self test on the boundary-test cells. Activating the TAP in the normal mode does not affect the functional operation of the SCOPE universal bus transceivers.\nData flow in each direction is controlled by output-enable ( and ), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A-bus data is latched while CLKAB is held at a static low or high logic level. Otherwise, if LEAB is low, A-bus data is stored on a low-to-high transition of CLKAB. When is low, the B outputs are active. When is high, the B outputs are in the high-impedance state. B-to-A data flow is similar to A-to-B data flow but uses the , LEBA, and CLKBA inputs.\nIn the test mode, the normal operation of the SCOPE universal bus transceivers is inhibited and the test circuitry is enabled to observe and control the I/O boundary of the device. When enabled, the test circuitry performs boundary-scan test operations according to the protocol described in IEEE Standard 1149.1-1990.\n?\nFour dedicated test pins observe and control the operation of the test circuitry: test data input (TDI), test data output (TDO), test mode select (TMS), and test clock (TCK). Additionally, the test circuitry performs other testing functions such as parallel-signature analysis (PSA) on data inputs and pseudo-random pattern generation (PRPG) from data outputs. All testing and scan operations are synchronized to the TAP interface.\nImproved scan efficiency is accomplished through the adoption of a one boundary-scan cell (BSC) per I/O pin architecture. This architecture is implemented in such a way as to capture the most pertinent test data. A PSA/COUNT instruction also is included to ease the testing of memories and other circuits where a binary count addressing scheme is useful.\nActive bus-hold circuitry holds unused or floating data inputs at a valid logic level.\nThe B-port outputs of 'ABTH182502A, which are designed to source or sink up to 12 mA, include 25- series resistors to reduce overshoot and undershoot. \nThe SN54ABTH18502A and SN54ABTH182502A are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABTH18502A and SN74ABTH182502A are characterized for operation from -40°C to 85°C.\n?\n?\nA-to-B data flow is shown. B-to-A data flow is similar but uses OEBA\\, LEBA, and CLKBA.\nOutput level before the indicated steady-state input conditions were established\n \n

SN74ABTH182502A

SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

SN74ABTH182502A

SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

SN74ABTH182502A

SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

SN74ABTH182502APM

Marking：ABTH182502A；Package：LQFP；SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

MembersoftheTexasInstruments SCOPEEFamilyofTestabilityProducts MembersoftheTexasInstruments WidebusEFamily CompatibleWiththeIEEEStandard 1149.1-1990(JTAG)TestAccessPort andBoundary-ScanArchitecture UBTE(UniversalBusTransceiver) CombinesD-TypeLatchesandD-Typ

SN74ABTH182502APM

SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

SN74ABTH182502APM

SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

SN74ABTH182502APM

SCAN TEST DEVICES WITH 18-BIT UNIVERSAL BUS TRANSCEIVERS

SN74ABTH182502APM

Package：64-LQFP；包裝：管件 類別：集成電路（IC） 通用總線功能 描述：IC SCAN TEST UNIV TXRX 64LQFP