SN74ABT841ADWG4屬于集成電路（IC）的鎖存器。由美國德州儀器公司制造生產的SN74ABT841ADWG4鎖存器鎖存器是類似于觸發器的基本數字存儲設備，但是不同之處在于，在鎖存使能（或類似命名）信號處于有效邏輯狀態的任何時間，保持的邏輯狀態都可以改變?！巴该鳌辨i存器還允許設備輸出在鎖存使能信號有效時反映輸入的當前狀態，而相反的是，狀態僅在保持狀態已固定時改變。

State-of-the-Art EPIC-IIBE BiCMOS Design

Significantly Reduces Power Dissipation

ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

Latch-Up Performance Exceeds 500 mA Per

JEDEC Standard JESD-17

Typical VOLP (Output Ground Bounce) < 1 V

at VCC = 5 V, TA = 25°C

High-Impedance State During Power Up

and Power Down

High-Drive Outputs (–32-mA IOH, 64-mA IOL)

Package Options Include Plastic

Small-Outline (DW), Shrink Small-Outline

(DB), and Thin Shrink Small-Outline (PW)

Packages, Ceramic Chip Carriers (FK),

Ceramic Flat (W) Package, and Plastic (NT)

and Ceramic (JT) DIPs

description

The SN54ABT841 and SN74ABT841A 10-bit

latches are designed specifically for driving highly

capacitive or relatively low-impedance loads.

They are particularly suitable for implementing

buffer registers, I/O ports, bidirectional bus

drivers, and working registers.

The ten transparent D-type latches provide true

data at their outputs.

A buffered output-enable (OE) input can be used

to place the ten outputs in either a normal logic

state (high or low logic levels) or a

high-impedance state. In the high-impedance

state, the outputs neither load nor drive the bus

lines significantly. The high-impedance state and

increased drive provide the capability to drive bus

lines without need for interface or pullup

components.

OE does not affect the internal operations of the latch. Previously stored data can be retained or new data can

be entered while the outputs are in the high-impedance state.

When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down.

However, to ensure the high-impedance state above 2.1 V, OE should be tied to VCC through a pullup resistor;

the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54ABT841 is characterized for operation over the full military temperature range of –55°C to 125°C. The

SN74ABT841A is characterized for operation from –40°C to 85°C.