SN74ABT162823ADLR屬于集成電路（IC）的觸發器。由美國德州儀器公司制造生產的SN74ABT162823ADLR觸發器觸發器是能夠存儲單個邏輯狀態或信息“位”的基本數字存儲器件。這些器件至少有兩個輸入；一個或多個用于傳遞要存儲的數據，另一個用于指示存儲該數據的時間點。不同的觸發器類型，例如 D（延遲）、SR（置位復位）和 JK，對提供給其輸入的信號有不同的響應，可用于實現不同的邏輯功能。這些器件與鎖存器的不同之處在于它們是邊緣敏感器件，其保持的邏輯狀態僅在接收到有效時鐘信號時才會改變。

Members of the Texas Instruments

Widebus? Family

Output Ports Have Equivalent 25-Ω Series

Resistors So No External Resistors Are

Required

Typical VOLP (Output Ground Bounce)

<1 V at VCC = 5 V, TA = 25°C

High-Impedance State During Power Up

and Power Down

Ioff and Power-Up 3-State Support Hot

Insertion

Distributed VCC and GND Pins Minimize

High-Speed Switching Noise

Flow-Through Architecture Optimizes PCB

Layout

description/ordering information

These 18-bit bus-interface flip-flops feature

3-state outputs designed specifically for driving

highly capacitive or relatively low-impedance

loads. They are particularly suitable for

implementing wider buffer registers, I/O ports,

bidirectional bus drivers with parity, and working

registers.

The ’ABT162823A devices can be used as two

9-bit flip-flops or one 18-bit flip-flop. With the

clock-enable (CLKEN) input low, the D-type

flip-flops enter data on the low-to-high transitions

of the clock. Taking CLKEN high disables the

clock buffer, thus latching the outputs. Taking the

clear (CLR) input low causes the Q outputs to go

low independently of the clock.