SN65LVDS1050PW屬于集成電路（IC）的信號緩沖器、中繼器、分離器。由美國德州儀器公司制造生產的SN65LVDS1050PW信號緩沖器、中繼器、分離器信號緩沖器、中繼器和分離器系列中的產品適用于遠距離電氣互連或電纜系統的數字信息傳輸。所有實際互連系統都具有非理想特性，該系列產品主要用于解決數字信息傳輸過程中因此造成的模擬問題。此外，還有其他功能，例如不同物理接口樣式之間的轉換和多路復用。

FEATURES

· Typically Meets or Exceeds ANSI

TIA/EIA-644-1995 Standard

· Operates From a Single 2.4-V to 3.6-V Supply

· Signaling Rates up to 400 Mbit/s

· Bus-Terminal ESD Exceeds 12 kV

· Low-Voltage Differential Signaling With Typical

Output Voltages of 285 mV and a 100-W

Load

· Propagation Delay Times

· Driver: 1.7-ns Typical

· Receiver: 3.7-ns Typical

· Driver: 25-mW Typical

· Receiver: 60-mW Typical

· Power Dissipation at 200 MHz

· Driver: 25-mW Typical

· Receiver: 60-mW Typical

· LVTTL Input Levels Are 5-V Tolerant

· Receiver Maintains High Input Impedance

· Receiver Has Open-Circuit Fail Safe

· Available in Thin Shink Outline Packaging

With 20-mil Lead Pitch

DESCRIPTION

The SN65LVDS1050 is similar to the SN65LVDS050

except that it is characterized for operation with a lower

supply voltage range and packaged in the thin shrink

outline package for portable battery-powered applications.

The differential line drivers and receivers use low-voltage differential signaling (LVDS) to achieve signaling rates as

high as 400 Mbps. The drivers provide a minimum differential output voltage magnitude of 247 mV into a 100-W load

and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.

The intended application of this device and signaling technique is for point-to-point baseband data transmission

over controlled impedance media of approximately 100-W characteristic impedance. The transmission media may

be printed-circuit board traces, backplanes, or cables. Note: The ultimate rate and distance of data transfer is

dependent upon the attenuation characteristics of the media, the noise coupling to the environment and other

application-specific characteristics.

The SN65LVDS1050 is characterized for operation from -40°C to 85°C.