SN65LVDS104PWR屬于集成電路（IC）的信號緩沖器、中繼器、分離器。由美國德州儀器公司制造生產的SN65LVDS104PWR信號緩沖器、中繼器、分離器信號緩沖器、中繼器和分離器系列中的產品適用于遠距離電氣互連或電纜系統(tǒng)的數(shù)字信息傳輸。所有實際互連系統(tǒng)都具有非理想特性，該系列產品主要用于解決數(shù)字信息傳輸過程中因此造成的模擬問題。此外，還有其他功能，例如不同物理接口樣式之間的轉換和多路復用。

1 Features

1? Receiver and Drivers Meet or Exceed the

Requirements of ANSI EIA/TIA-644 Standard

– SN65LVDS105 Receives Low-Voltage TTL

(LVTTL) Levels

– SN65LVDS104 Receives Differential Input

Levels, ±100 mV

? Typical Data Signaling Rates to 400 Mbps or

Clock Frequencies to 400 MHz

? Operates From a Single 3.3-V Supply

? Low-Voltage Differential Signaling With Typical

Output Voltage of 350 mV and a 100-Ω Load

? Propagation Delay Time

– SN65LVDS105 – 2.2 ns (Typ)

– SN65LVDS104 – 3.1 ns (Typ)

? LVTTL Levels Are 5-V Tolerant

? Electrically Compatible With LVDS, PECL,

LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT,

SSTL, or HSTL Outputs With External Networks

? Driver Outputs Are High-Impedance When

Disabled or With VCC <1.5 V

? Bus-Pin ESD Protection Exceeds 16 kV

? SOIC and TSSOP Packaging

2 Applications

? Clock Distribution

? Wireless Base Stations

? Network Routers

3 Description

The SN65LVDS10x are a differential line receiver and

a LVTTL input (respectively) connected to four

differential line drivers that implement the electrical

characteristics of low-voltage differential signaling

(LVDS). LVDS, as specified in EIA/TIA-644 is a data

signaling technique that offers low-power, low-noise

coupling, and switching speeds to transmit data at

relatively long distances. (Note: The ultimate rate and

distance of data transfer is dependent upon the attenuation characteristics of the media, the noise

coupling to the environment, and other system

characteristics.)

The intended application of this device and signaling

technique is for point-to-point baseband data

transmission over controlled impedance media of

approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables.

Having the drivers integrated into the same substrate,

along with the low pulse skew of balanced signaling,

allows extremely precise timing alignment of the

signals repeated from the input. This is particularly

advantageous in distribution or expansion of signals

such as clock or serial data stream.

The SN65LVDS10x are characterized for operation from –40°C to 85°C.

The SN65LVDS10x are members of a family of LVDS

repeaters. A brief overview of the family is provided in the Selection Guide to LVDS Repeaters section.