SN65LVDS047D屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的SN65LVDS047D驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

FEATURES

· >400 Mbps (200 MHz) Signaling Rates

· Flow-Through Pinout Simplifies PCB Layout

· 300 ps Maximum Differential Skew

· Propagation Delay Times 1.8 ns (Typical)

· 3.3 V Power Supply Design

· ±350 mV Differential Signaling

· High Impedance on LVDS Outputs on Power

Down

· Conforms to TIA/EIA-644 LVDS Standard

· Industrial Operating Temperature Range

(-40°C to 85°C)

· Available in SOIC and TSSOP Packages

DESCRIPTION

The SN65LVDS047 is a quad differential linedriver

that implements the electrical characteristics of

low-voltage differential signaling (LVDS). This

signaling technique lowers the output voltage levels

of 5-V differential standard levels (such as

EIA/TIA-422B) to reduce the power, increase the

switching speeds, and allow operation with a 3.3-V

supply rail. Any of the four current-mode drivers will

deliver a minimum differential output voltage

magnitude of 247 mV into a 100-W load when

enabled.

The intended application of this device and signaling

technique is for point-to-point and multi-drop

baseband data transmission over controlled

impedance media of approximately 100 W. The

transmission media may be printed-circuit board

traces, backplanes, or cables. The ultimate rate and

distance of data transfer is dependent upon the

attenuation characteristics of the media, the noise

coupling to the environment, and other system

characteristics.