SN65HVD96DR屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的SN65HVD96DR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1FEATURES

2? Communicate Without Errors on Normal or

Reversed-Wire Bus Lines

? Up to 5 Mbps Signaling

? Industrial Temperature Range: –40°C to 85°C

? Symmetric Polarity Receiver

? Receiver Hysteresis > 100 mV

? Connect up to 32 Nodes Plus Parallel

Terminators on one Bus, or Connect up to 200

Nodes on an Unterminated Bus

? Transient Protection

– ±12 kV Human Body Model on Bus Pins

– ±25 V Repetitive Transient Pulse on Bus

Pins

? Additional Reliability Features:

– Bus Standoff From –35 V to 40 V

– Driver Output Short-Circuit Current Limit

– Automatic Thermal Shutdown and

Recovery

? Complies with ANSI/TIA-4963 Standard

DESCRIPTION

The SN65HVD96 is specifically designed to meet the requirements for a transceiver which operates with no

errors if the twisted-pair signal wires are connected normally or reversed. This allows for error free operation in

applications where the signal wires may become inadvertently reversed during installation or maintenance. This

feature is corrected internally so no intervention from the controller or operator is required. The SN65HVD96

complies with the requirements of ANSI/TIA-4963, Electrical Characteristics of Reversible Balanced Voltage

Digital Interface Circuits.

Similar to RS-485, these transceivers can be used for point-to-point, multi-drop, or multi-point networks.

Sympol? devices are not backwards compatible with, but are an upgrade to, existing RS-485 networks. The

pin-out is identical to the industry-standard SN75176 transceiver, allowing direct upgrade from RS-485 to

SymPol. Current-limited differential outputs protect in case of driver contention on a party-line bus. High receiver

input impedance allows connection of at least 32 nodes. Several fault tolerant features are integrated into the

device to protect from operational hazards. Current limiting on the driver outputs protects against short-circuit

faults, and operates independently on each driver output. An automatic thermal shutdown protects the driver

circuits against over temperature conditions. The receiver output enters a deterministic failsafe state if the bus

connection is left disconnected or if the bus wires are shorted together.

The small outline integrated circuit (SOIC) package saves board space compared to equivalent discrete

implementations. These devices are fully characterized for operation over the industrial temperature range

of –40°C to 85°C.