SN65HVD267DR屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的SN65HVD267DR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1 Features

1? Meets the Requirements of ISO11898-2

? Turbo CAN:

– Specified for 2-Mbps CAN FD (CAN with

Flexible Data Rate)

– Short and Symmetrical Propagation Delay

Times and Fast Loop Times for Enhanced

Timing Margin

– Higher Data Rates in CAN Networks

? I/O Voltage Range Supports 3.3-V and 5-V MCUs

? Ideal Passive Behavior When Unpowered

– Bus and Logic Terminals are High Impedance

(no load)

– Power-Up/Down With Glitch Free Operation

On Bus

? Protection Features

– HBM ESD Protection Exceeds ±12 kV

– Bus Fault Protection –27 V to 40 V

– Undervoltage Protection on Supply Terminals

– Driver Dominant Time Out (TXD DTO)

– SN65HVD267: Receiver Dominant Time Out

(RXD DTO)

– SN65HVD267: FAULT Output Terminal

– Thermal Shutdown Protection

? Characterized for –40°C to 125°C Operation

2 Applications

? 2-Mbps Operation in CAN with Flexible Data Rate

Networks

? 1-Mbps Operation in Highly Loaded CAN

Networks Down to 10-kbps Networks Using TXD

DTO

? Industrial Automation, Control, Sensors and Drive

Systems

? Building, Security and Climate Control Automation

? Telecom Base Station Status and Control

? SN65HVD267: Functional Safety With Redundant

and Multi-topology CAN networks

? CAN Bus Standards Such as CANopen,

DeviceNet, NMEA2000, ARNIC825, ISO11783,

CANaerospace

3 Description

This CAN transceiver meets the ISO1189-2 High

Speed CAN (Controller Area Network) physical layer standard. It is designed for data rates in excess of 2

Mpbs (megabits per second) for CAN FD (CAN with

flexible data rate), greater than 1 Mbps for CAN in

short networks, and enhanced timing margin and

higher data rates in long and highly-loaded networks.

The device provides many protection features to enhance device and CAN-network robustness. The

SN65HVD267 adds additional features, allowing easy

design of redundant and multi-topology networks with

fault indication for higher levels of safety in the CAN

system.