SN65HVD1781DR屬于集成電路（IC）的驅動器接收器收發器。由美國德州儀器公司制造生產的SN65HVD1781DR驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

1 Features

1? Bus-Pin Fault Protection to:

– > ±70 V (SN65HVD1780, SN65HVD1781)

– > ±30 V (SN65HVD1782)

? Operation With 3.3-V to 5-V Supply Range

? ±16-kV HBM Protection on Bus Pins

? Reduced Unit Load for Up to 320 Nodes

? Failsafe Receiver for Open-Circuit, Short-Circuit,

and Idle-Bus Conditions

? Low Power Consumption

– Low Standby Supply Current, 1 μA Maximum

– ICC 4-mA Quiescent Current During Operation

? Pin-Compatible With Industry-Standard SN75176

? Signaling Rates of 115 kbps, 1 Mbps, and up to

10 Mbps

? Create a Custom Design using the SN65HVD178x

with the WEBENCH? Power Designer

2 Applications

? HVAC Networks

? Security Electronics

? Building Automation

? Telecommunication Equipment

? Motion Control

? Industrial Networks

3 Description

The SN65HVD178x devices are designed to survive

overvoltage faults such as direct shorts to power

supplies, mis-wiring faults, connector failures, cable

crushes, and tool mis-applications. The devices are

also robust to ESD events with high levels of

protection to the human-body-model specification.

The SN65HVD178x devices combine a differential

driver and a differential receiver, which operate from

a single power supply. In the SN65HVD1782, the

driver differential outputs and the receiver differential

inputs are connected internally to form a bus port

suitable for half-duplex (two-wire bus)

communication. This port features a wide commonmode

voltage range, making the devices suitable for

multipoint applications over long cable runs. These

devices are characterized from –40°C to 125°C.

These devices are pin-compatible with the industrystandard

SN75176 transceiver, making them drop-in

upgrades in most systems.

These devices are fully compliant with ANSI TIA/EIA

485-A with a 5-V supply and can operate with a 3.3-V

supply with reduced driver output voltage for lowpower

applications. For applications where operation

is required over an extended common-mode voltage

range, see the SN65HVD1785 (SLLS872) data sheet.