SN64BCT25245DW屬于集成電路（IC）的緩沖器驅動器接收器收發器。由美國德州儀器公司制造生產的SN64BCT25245DW緩沖器，驅動器，接收器，收發器邏輯緩沖器、驅動器、接收器和收發器允許隔離對某個電路的邏輯信號的訪問，以用于另一電路。緩沖器將其輸入信號（不變或反相）傳遞到其輸出，并可能用于清除弱信號或驅動負載。在布爾邏輯仿真器中，緩沖器主要用于增加傳播延遲。邏輯接收器和收發器允許在數據總線之間進行隔離通信。

State-of-the-Art BiCMOS Design

Significantly Reduces ICCZ

Designed to Facilitate Incident-Wave

Switching for Line Impedances of 25 Ω

or Greater

Distributed VCC and GND Pins Minimize

Noise Generated by the Simultaneous

Switching of Outputs

Data Flow-Through Pinout (All Inputs

on Opposite Side From Outputs)

High-Impedance State During Power Up

and Power Down

ESD Protection Exceeds 2000 V

Per MIL-STD-883C, Method 3015

Package Options Include Plastic

Small-Outline (DW) Packages and Standard

Plastic 300-mil DIPs (NT)

description

The SN64BCT25245 is a 25-Ω octal bus transceiver designed for asynchronous communication between data

buses. It improves both the performance and density of 3-state memory address drivers, clock drivers, and

bus-oriented transceivers.

The device allows data transmission from the A bus to the B bus or from the B bus to the A bus depending upon

the logic level at the direction-control (DIR) input. The output-enable (OE) input can disable the device so that

both buses are effectively isolated.

This transceiver is capable of sinking 188-mA IOL, which facilitates switching 25-Ω transmission lines on the

incident wave. The distributed VCC and GND pins minimize switching noise for more reliable system operation.

The outputs are in a high-impedance state during power up and power down while the supply voltage is less

than approximately 3 V.

The SN64BCT25245 is characterized for operation from ?40°C to 85°C and 0°C to 70°C.