1 Features

1? VID V62/18617

? Radiation Hardened

– Single Event Latch-up (SEL) Immune to 43

MeV-cm2/mg at 125°C

– ELDRS Free to 30 krad(Si)

– Total Ionizing Dose (TID) RLAT for Every

Wafer Lot up to 20 krad(Si)

? Space Enhanced Plastic

– Controlled Baseline

– Gold Wire

– NiPdAu Lead Finish

– One Assembly and Test Site

– One Fabrication Site

– Available in Military (–55°C to 125°C)

Temperature Range

– Extended Product Life Cycle

– Extended Product-Change Notification

– Product Traceability

– Enhanced Mold Compound for Low

Outgassing

? Compatible With ISO 11898-2

? Bus Pins Fault Protection Exceeds ±16 V

? Bus Pins ESD Protection Exceeds ±14-kV HBM

? Data Rates up to 1 Mbps

? Extended –7-V to 12-V Common Mode Range

? High-Input Impedance Allows for 120 Nodes

? LVTTL I/Os are 5-V Tolerant

? Adjustable Driver Transition Times for Improved

Signal Quality

? Unpowered Node Does Not Disturb the Bus

? Low-Current Standby Mode, 200-μA Typical

? Loopback for Diagnostic Functions

? Thermal Shutdown Protection

? Power Up and Power Down With Glitch-Free Bus

Inputs and Outputs

– High-Input Impedance With Low VCC

– Monolithic Output During Power Cycling

2 Applications

? Supports Low Earth Orbit Space Applications

? Space Data Bus Communication and Control

? Satellite Telemetry and Telecommand for Onboard

Data Handling

? CAN Bus Standards Such as CANopen,

DeviceNet, CAN Kingdom, ISO 11783, NMEA

2000, SAE J1939

3 Description

The SN55HVD233-SEP is used in applications

employing the controller area network (CAN) serial

communication physical layer in accordance with the

ISO 11898 standard. As a CAN transceiver, the

device provides transmit and receive capability

between the differential CAN bus and a CAN

controller, with signaling rates up to 1 Mbps.

Designed for operation in especially harsh radiation

environments, the SN55HVD233-SEP features crosswire,

overvoltage, loss of ground protection to ±16 V,

and overtemperature (thermal shutdown) protection.

This device operates over a wide –7-V to 12-V

common mode range. This transceiver is the interface

between the host CAN controller on the

microprocessor, FPGA, or ASIC, and the differential

CAN bus used in satellite applications.