GENERAL DESCRIPTION

The SGM7220 enables USB Type-C ports with the

Configuration Channel (CC) logic needed for Type-C

interface. The SGM7220 uses the CC pins to determine

port attachment and detachment, cable orientation, role

detection and port control for Type-C current mode.

The SGM7220 can be configured as a downstream

facing port (DFP), an upstream facing port (UFP) or a

dual role port (DRP) making it ideal for most

applications.

The SGM7220 alternates configuration as a DFP or an

UFP according to the Type-C specifications. The CC

logic block monitors the CC1 and CC2 pins for pull-up

or pull-down resistances to determine when a USB port

has been attached, the orientation of the cable and the

role detected. The CC logic detects the Type-C current

mode as default, medium or high depending on the role

detected. VBUS detection is implemented to determine a

successful attachment in UFP and DRP modes.

The SGM7220 operates over a wide supply range and

has low power consumption. The device is available in

a Green UTQFN-1.6×1.6-12L package and operates in

industrial and commercial temperature range of -40℃

to +125℃.

FEATURES

● Supply Voltage Range: 2.7V to 5V

● Supports USB Type-C Specification 1.1

● Enable Control: Active Low (EN Pin)

● Backward Compatible with USB Type-C

Specification 1.0

● Supports up to 3A of Current Advertisement and

Detection

● Mode Configuration

? Host Only - DFP (Source)

? Device Only - UFP (Sink)

? Dual Role Port - DRP

? Try.SNK

● Channel Configuration (CC)

? Attachment of USB Port Detection

? Cable Orientation Detection

? Role Detection

? Type-C Current Mode (Default, Medium or High)

● VBUS Detection

● I2C or GPIO Control

● Supports 400kHz I2C Bus

● Role Configuration Control through I2C

● Low Current Consumption

● -40℃ to +125℃ Operating Temperature Range

● Available in a Green UTQFN-1.6×1.6-12L Package

APPLICATIONS

Host, Device, Dual Role Port Applications

Mobile Phones

Tablets and Notebooks

USB Peripherals