SE5005L屬于RF/IF射頻/中頻RFID的射頻放大器。由美國思佳訊公司制造生產的SE5005L射頻放大器在射頻應用中，射頻放大器產品可用于信號增益和緩沖。這些產品與通用運算放大器的不同之處在于，它們通常適用于更高的頻率，更傾向于提供不可調節的固定增益，并且輸入或輸出阻抗值符合常用傳輸線特性阻抗。

Applications

? DSSS 5 GHz WLAN (IEEE802.11a)

? Access points

? PCMCIA cards

? PC cards

特性 Features

? 5 GHz matched +18 dBm PA

? Integrated PA enable pin (VEN)

? Buffered, temperature-compensated power detector

? High and low linearity modes

? 3 EVM, @ +18 dBm, 64 QAM, 54 Mbps

? +30 dB typical gain

? DC blocked

? QFN (16-pin, 3.0 mm x 3.0 mm x 0.9 mm) package (MSL1 @ 260 °C per JEDEC J-STD-020)

描述 Description

The SE5005L is a 5 GHz Power Amplifier (PA) that offers high linear power for wireless LAN applications.

The SE5005L offers a high level of integration for a simplified design, which provides quicker time-to-market and higher application board production yield. The SE5005L integrates all matching elements, a 3.8 GHz notch filter, and a temperature-compensated, load-insensitive power detector with +20 dB of dynamic range.

For wireless LAN applications, the SE5005L meets the requirements of IEEE 802.11a and delivers approximately +18 dBm of linear output power. The SE5005L also features a linearity mode-control function to reduce current consumption at low power.

The SE5005L integrates the reference voltage generator, which allows for a true Complementary Metal Oxide Semiconductor (CMOS) compatible digital enable (EN) function to turn the PA on and off.

A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1.