GENERAL DESCRIPTION

The SAA6713H is a dual input single-chip Thin Film Transistor (TFT) display controller IC with analog VGA and digital DVI 1.0 standard input capabilities. Additionally, the SAA6713H includes a wide range of functions for processing and the measurement of incoming RGB data according to the requirements of an XGA TFT display.

FEATURES

? Integrated triple Analog-to-Digital Converter (ADC) for RGB analog sampling up to 110 MHz

? Integrated PLL for dot clock recovery

? Integrated single channel Digital Visual Interface (DVI)(1) compliant digital serial interface up to 110 MHz dot clock

? Integrated composite sync slicer

? High-bandwidth Digital Content Protection (HDCP)(2)

? Integrated sync-on-green separation

? Support of Super Extended Graphics Adapter (SXGA) input mode

? Independent horizontal and vertical arbitrary ratio up and downscaling

? Video mode detection

? Auto-adjustment support for sampling phase and frequency, picture alignment and colour alignment

? Advanced colour adjustment

? Integrated On Screen Display (OSD) controller with predefined and programmable font and bit-mapped graphics, as well as a hardware overlay cursor

? 10-bit gamma correction

? Support for 6-bit and 8-bit panels by temporal dithering

? Freely programmable output timing supports displays of virtually any manufacturer

? Directly interfaces row and column drivers (TCON), versatile timing generation

? Programmable output pin ordering

? Adjustable output pin ordering

? High-speed I2C-bus interface up to 3.4 Mbits/s

? Event driven interrupt generation for easy interfacing with microcontroller software.