描述 Description

The RP116 Series are CMOS-based LDO regulators featuring 400mA output. The input voltage as low as Min. 1.0V and the output voltage can be set from 0.7V. The output voltage accuracy has been improved to ± 0.8% and due to a built-in transistor with low on-resistance of 0.55Ω (at VSET=1.5V), RP116 provides a low dropout voltage. The CE pin can switch the regulator to standby mode. RP116 has a constant slope circuit. It means a function of soft-start to reduce the inrush current at power on.

RP116 is available in 0.69mm square WLCSP-4-P7 package. RP116Z (WLCSP-4-P7) is thiner than RP106Z (WLCSP-4-P5). (t=0.36mm)

特性 Features

? Input Voltage Range (Absolute maximum rating)：1.0 V to 3.6 V (4.0 V)；
? Supply Current：Typ. 48 μA；
? Standby Current：Typ. 0.1 μA；
? Ripple Rejection：Typ. 60 dB (f=10kHz)；
? Output Voltage Range：0.7 V to 1.8 V (0.1V steps)；
? Output Voltage Accuracy：±0.8% (VOUT≥1.0V, Topt=25°C)；
? Temperature-Drift Coefficient of Output Voltage：Typ. ±60 ppm/°C；
? Dropout Voltage：Typ. 0.22 V (VOUT=1.5V)；
? Line Regulation：Typ. 0.10%/V；
? Package：WLCSP-4-P7；
? Built-in Fold Back Protection Circuit：Typ. 110 mA (Current at short mode)；
? Protection Function：Built-in Constant Slope Circuit；
? Ceramic capacitors are recommended to be used with this IC：1.0 μF or more；

簡介

RP116屬于集成電路（IC）的穩壓器-線性。由制造生產的RP116穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。