Eval-M1-CM610N3 is an evaluation board formotor drive applications based on a 3-phase IPM. Combined in a

kit with one of the available MADK control board options, it demonstrates Infineon's IPM technology formotor

drives. The kit demonstrates Infineon’s IPM technology formotor drives.

Main features of CIPOS? Mini IPM IKCM10H60GA are:

? TRENCHSTOP? IGBTs

? Maximum blocking voltage VCES= 600V

? Maximum output current at 25°C case temperature IC= 10A

? Fully isolated Dual In-Linemoldedmodule

? Rugged SOI gate driver technology with stability against transient and negative voltages

? Negative potential allowed up to VS = -11V for signal transmission at VBS= 15V

? Integrated bootstrap functionality

? Overcurrent shutdown

? Temperaturemonitoring

? Undervoltage lockout at all channels

? Low side emitter pins accessible for phase currentmonitoring in open emitter configuration

? Cross conduction prevention

? All six switches turn off during protection

? Lead-free terminal plating; RoHS compliant

The evaluation board characteristics are:

? Nominal input voltage 220 VAC

? Maximum 750 Wmotor power output

? On board EMI filter

? Current sensing for each phase configured by default

? Overcurrent protection

? Overtemperature hardware protection

? Sensing of DC-link voltage

? Thermistor output

? Fault diagnostic output

? Measurement test-points compatible to standard oscilloscope probes

? PCB is 120mmx 120mmand has two layers with 35 μmcopper each

? RoHS complaint