描述 Description

The RFX1010 is a broadband, fully integrated, single-chip, single-dieRFeIC (RF Front-end Integrated Circuit) which incorporates all the RFfunctionality needed for a TDD-mode RF front-end operated in the700/800/900MHz frequency bands.

The RFX1010 architecture integrates a linear PA, LNA, Transmit andReceive switching circuitry, associated matching networks, andharmonic filters all in a CMOS single-chip device. The RFX1010requires minimal external components including the power supplybypass capacitors.

This RFeIC is designed for medium to high output power, andconsumes low current in receive mode. The combination of superioroutput power, high sensitivity and efficiency, low noise, small formfactor and low cost makes RFX1010 the ideal solution for multipleapplications including IEEE 802.15.4, ZigBee, AMR, Smart Home AreaNetwork and other ISM applications in the sub-GHz bands from 780 to960MHz. It can also be used for IEEE 802.11p and 802.11ah.

特性 Features

? 700/800/900MHz Single-Chip, Single-Die RF Front-End IC
? Separate TX and RX RF Transceiver Ports and Single Antenna Port
? 700/800/900MHz Power Amplifier with Low-Pass Harmonic Filters
? Low Noise Amplifier
? Transmit/Receive Switch Circuitry
? High Transmit Signal Linearity Meeting Standards for OQPSK Modulation
? Low Voltage (1.2V) CMOS Control Logic
? ESD Protection Circuitry on All Pins DC Grounded RF Ports
? Internal RF Decoupling on All VDD Bias Pins
? Low Noise Figure for the Receive Channel
? High Power Handling Capability for Received Signals
? Very Low DC Power Consumption
? Full On-chip Matching and Decoupling Circuitry
? Minimal External Components Required
? 50-Ohm Input / Output Matching
? Market Proven Low Cost CMOS Technology
? 3 x 3 x 0.55mm Small Outline QFN-16 Package with Exposed Ground Pad

應用 Application

? Smart Cities

? Connected Homes

簡介

RFX1010屬于RF/IF射頻/中頻RFID的射頻前端（LNA+PA）。由制造生產的RFX1010射頻前端（LNA + PA）本系列中的產品是各種集成電路，其中集成了射頻 (RF) 信號鏈連接到系統天線的部分中常見的一種或多種功能，如低噪聲放大器 (LNA) 和可編程放大器 (PA)。任何給定器件所含的實際功能各不相同，相比旨在提供更高應用靈活性的器件，針對相對較窄應用的器件通常集成更大一部分必要的信號鏈。