描述 Description

QN902x is an ultra-low power, high-performance and highly integrated Bluetooth LE solution. It is used in Bluetooth Smart applications such as sports and fitness, human interface devices, and app-enabled smart accessories. It is specially designed for wearable electronics and can run on a small capacity battery such as a coin cell battery.
QN902x integrates a Bluetooth LE radio, controller, protocol stack and profile software on a single chip, providing a flexible and easy to use Bluetooth LE SoC solution. It also has a high-performance MCU and an on-chip memory that can support users to develop a single-chip wireless MCU solution. Users can also utilize QN902x as a network processor by connecting to an application processor for more advanced applications.
Additional system features include fully integrated DC-to-DC converter and LDO, low-power sleep timer, battery monitor, general-purpose ADC, and GPIOs. These features reduce overall system cost and size. QN902x has very low power consumption in all modes. It enables long life in battery-operated systems while maintaining excellent RF performance. QN9020/1 operates with a power supply range of 2.4 V to 3.6 V. The QN9022 operates with a power supply range of 1.8 V to 3.6 V.

特性 Features

True single-chip Bluetooth LE SoC solutionIntegrated Bluetooth LE radio
Complete Bluetooth LE protocol stack and application profiles
Supports both master and slave modes
Up to eight simultaneous links in master mode
Frequency bands: 2400 MHz to 2483.5 MHz
1 Mbit/s on-air data rate and 250 kHz deviation
GFSK modulation format

RF-95 dBm RX sensitivity (non-DC-to-DC mode)
-93 dBm RX sensitivity (DC-to-DC mode)
TX output power from -20 dBm to +4 dBm
Fast and reliable RSSI and channel quality indication
Compatible with worldwide radio frequency regulations
Excellent link budget up to 99 dB
Very low power consumptionSingle power supply of 2.4 V to 3.6 V for QN9020/1
Single power supply of 1.8 V to 3.6 V for QN9022
Integrated DC-to-DC converter and LDO
2 μA deep sleep mode
3 μA sleep mode (32 kHz RC oscillator on)
9.25 mA RX current with DC-to-DC converter
8.8 mA TX current @0 dBm TX power with DC-to-DC converter
Compact 6 mm x 6 mm HVQFN48 package for QN9020, 5 mm x 5 mm HVQFN32 package for QN9021, and 5 mm x 5 mm HVQFN40 package for QN9022
MicrocontrollerIntegrated 32-bit Arm? Cortex? M0 MCU
64 kB system memory
User-controllable code protection
High-level integration4-channel, 10-bit general-purpose ADC
Two general-purpose analog comparators
31 GPIO pins for QN9020, 15 GPIO pins for QN9021, and 22 GPIO pins QN9022
GPIO pins can be used as interrupt sources
Four general-purpose timers
32 kHz sleep timer
Watchdog timer
Real-time clock with calibration
2-channel programmable PWM
Two SPI/UART interfaces
I2C-bus master/slave interface
Brownout detector
Battery monitor
AES-128 security coprocessor
16 MHz or 32 MHz crystal oscillator
Low power 32 kHz RC oscillator
32.768 kHz crystal oscillator

Target ApplicationsSports and fitness
Healthcare and medical
Remote control
Smartphone accessories
PC peripherals (mouse and keyboard)
Wireless Sensor Networks

應(yīng)用 Application

Sports and fitness
Healthcare and medical
Remote control
Smartphone accessories
PC peripherals (mouse and keyboard)
Wireless Sensor Networks