PTH08080WAZT屬于電源-板安裝的直流轉換器。由美國德州儀器公司制造生產(chǎn)的PTH08080WAZT直流轉換器一種旨在將直流電壓輸入電平改變?yōu)橐粋€或多個不同的直流電壓輸出電平的裝置。

1FEATURES

? Up to 2.25-A Output Current at 85°C

? 4.5-V to 18-V Input Voltage Range

? Wide-Output Voltage Adjust

(0.9 V to 5.5 V)

? Efficiencies Up To 93%

? On/Off Inhibit

? Undervoltage Lockout (UVLO)

? Output Overcurrent Protection

(Nonlatching, Auto-Reset)

? Overtemperature Protection

? Ambient Temperature Range: –40°C to 85°C

? Surface-Mount Package

? Safety Agency Approvals:

UL/CUL 60950, EN60950

APPLICATIONS

? Telecommunications, Instumentation, surfaceand

General-Purpose Circuits

DESCRIPTION

The PTH08080W is a highly integrated, low-cost

switching regulator module that delivers up to 2.25 A of output current. The PTH08080W sources output

current at a much higher efficiency than a TO-220

linear regulator IC, thereby eliminating the need for a

heat sink. Its small size (0.5 × 0.6 in) and flexible

operation creates value for a variety of applications.

The input voltage range of the PTH08080W is from

4.5 V to 18 V, allowing operation from either a 5-V or

12-V input bus. Using state-of-the-art switched-mode

power-conversion technology, the PTH08080W can

step down to voltages as low as 0.9 V from a 5-V

input bus, with less than 1 W of power dissipation. The output voltage can be adjusted to any voltage

over the range, 0.9 V to 5.5 V, using a single external

resistor. Operating features include an undervoltage

lockout (UVLO), on/off inhibit, overcurrent protection,

and overtemperature protection. Target applications

include telecommunications, test and measurement

applications, and high-end consumer products. This

product is available in both through-hole and surfaceand

mount package options, including tape and reel.