GENERAL DESCRIPTION

The QuadPHYTM is a Quad PHYsical layer transceiver ideal for systems requiring large numbers of point-to-point gigabit links. It provides four individual serial channels capable of operation at up to 1.25 Gbps each, which may be grouped together to form a single 5.0 Gbps bidirectional link. Each of the four primary channels has a corresponding secondary channel that can be enabled via the MDC/MDIO serial interface.

FEATURES

? Four independent 1.0-1.25 Gbit/s transceivers

? Four secondary channels to support channel redundancy

? Ultra low power operation: 1.25 Watt typical

? Integrated serializer/deserializer, clock synthesis, clock recovery, and 8B/10B encode/decode logic

? Physical Coding Sublayer (PCS) logic for Gigabit Ethernet

? Selectable 8-bit, 10-bit, or IEEE 802.3z GMII parallel interface

? Optional Receive FIFOs which synchronize incoming data to local clock domain

? “Trunking” feature to de-skew and align received parallel data across four channels

? 100-156 MHz Single Data Rate (SDR) parallel transmit interface with clock forwarding

? 100-125 MHz SDR parallel receive interface

? Extensive control of loopback, BIST, and operating modes via 802.3 compliant MDC/MDIO serial interface

? Built-in packet generator/checker

? IEEE 1149.1 JTAG testing support

? IEEE 802.3z Gigabit Ethernet and ANSI X3T11 Fibre Channel support

? High speed outputs which feature programmable output current to directly drive dual-terminated line

? 2.5V, 0.25 micron CMOS technology with 3.3V tolerant I/O

? Direct interface to optical modules, coax, or serial backplanes

? Small footprint 19x19 mm, 289-pin PBGA

APPLICATIONS

? High speed serial backplanes

? Gigabit Ethernet links

? Fibre Channel links

? Intra-system interconnect

? ASIC to PMD link