FEATURES

? Configurable, multi-channel payload processor for aligning SONET virtual tributaries (VTs) or SDH tributary units (TUs) in an STS-192/STM-64 or STS-48/STM-16 data stream.

? Supports High Order (STS/AU) pointer processing, payload processing, and path termination/monitoring.

? Supports Low Order (VT/TU) pointer processing, payload processing, and path monitoring.

? On the line side, provides working Serial Receive and Transmit ESSI (Extended SONET Serial Interface) CML links. Links are configurable as:

? 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or

? 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces.

? On the system side, provides working Add and Drop Serial ESSI links. Links are configurable as:

? 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or

? 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces.

? Independently configurable (2488.32 Mbit/s or 622.08 Mbit/s) Line and System Interfaces.

? Provides a set of Ingress and Egress shared protection links.

? Provides a per-link Space switch on egress interfaces.

? Provides a steady-state latency of:

? 21 μs from line Receive to system DROP for VT1.5.

? 2.5 μs from system ADD to line TX.

? Provides hardware based Message Assisted Protection Switching (MAPS) support to work with a centralized fabric (e.g. PM5370 WSE 40).

? Supports independent Line Receive and System Drop transport frame alignment for high-order traffic.

? Supports independent transport, highorder payload and tributary multi-frame alignments for low-order traffic.

? Supports independent Line Transmit and System Add transport frame alignments.

? On the receive path, provides optional SDH payload conversion of:

? AU4/VC4/TUG3/TU3/VC3/C3 to AU3/VC3/C3; or

? AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or

? AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or

? AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2.

? On the transmit path, provides optional SDH payload conversion of:

? AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or

? AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or

? AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2.

? Allows for low order (VT/TU) processing bypass.

? Supports high-order ESSI transport overhead transparency.

? Supports line and system diagnostic and facility loopbacks.

? Provides optional PRBS generation and monitoring features for ESSI offline link verification.

? Provides a generic 16-bit microprocessor bus interface for configuration, control, and status monitoring.

? Provides a standard 5-signal IEEE 1149.1 JTAG test port for boundary scan test purposes.

? Implemented in a 1.2 V core and 2.5 V I/O 0.13μm CMOS technology. Inputs are 3.3 V tolerant.

? Packaged in a 672-ball FCBGA top-hat, 27 mm x 27 mm.

? Power when full bandwidth is used (OC-192/STM-64 applications using 2.488 Mbit/s links) is 6.91 W typical.

? Power when 1/4 bandwidth is used (OC-48/STM-16 applications using 622 Mbit/s links) is 2.64 W typical.

APPLICATIONS

? SONET/SDH Add-Drop Multiplexer (ADM).

? SONET/SDH Digital Cross-connect (DCC).

? Multi-service Provisioning Platforms (MSPP).

? Multi-service ADM (MS-ADM).

? Multi-Service Switch.

? Optical Access Mux.

? Terminal Multiplexers.