Microcontroller Features

?Low Pin Count Packages, Ranging from 20 to 36 Pins, including UQFN as Small as 4x4 mm

?Up to 64K Flash Memory:

-20,000 erase/write cycle endurance

-20 years minimum data retention

-Self-programmable under software control

?Up to 8K Data Memory

?Pin-Compatible with Most PIC24 MCU/dsPIC? DSC Devices

?Multiple Interrupt Vectors with Individually Programmable Priority

?Fail-Safe Clock Monitor mode

?Configurable Watchdog Timer with On-Chip, Low-Power RC Oscillator

?Programmable Code Protection

?Selectable Oscillator Options including:

-High-precision, 8 MHz internal Fast RC (FRC) oscillator

-High-speed crystal/resonator oscillator or external clock

-2x/3x/4x/6x/12x/24x PLL, which can be clocked from the FRC or primary oscillator

Peripheral Features

?Atomic Set, Clear and Invert Operation on Select Peripheral Registers

?High-Current Sink/Source 11 mA/16 mA on All Ports

?Independent, Low-Power 32 kHz Timer Oscillator

?Two 4-Wire SPI modules (up to 25 Mbps):

-16-byte FIFO

-I2S mode

?Two UARTs:

- RS-232, RS-485 and LIN/J2602 support

- IrDA? with on-chip hardware encoder and decoder

?External Edge and Level Change Interrupt on All Ports

?CRC module

?Hardware Real-Time Clock and Calendar (RTCC)

?Up to 20 Peripheral Pin Select (PPS) Remappable Pins

?Seven Total 16-Bit Timers:

-Timer1: Dedicated 16-bit timer/counter

-Two additional 16-bit timers in each MCCP and SCCP module

?Capture/Compare/PWM/Timer modules:

-Two 16-bit timers or one 32-bit timer in each module

-PWM resolution down to 21 ns

-One Multiple Output (MCCP) module:

-Flexible configuration as PWM, input capture, output compare or timers

-Six PWM outputs

-Programmable dead time

-Auto-shutdown

-Two Single Output (SCCP) modules:

-Flexible configuration as PWM, input capture, output compare or timers

-Single PWM output

?Reference Clock Output (REFO)

?Two Configurable Logic Cells (CLC) with Internal Connections to Select Peripherals and PPS

Debug Features

?Two Programming and Debugging Interfaces:

-2-wire ICSP? interface with non-intrusive access and real-time data exchange with application

-4-wire MIPS? standard Enhanced JTAG interface

?IEEE Standard 1149.2 Compatible (JTAG) Boundary Scan

Analog Features

?Two Analog Comparators with Input

Multiplexing

?Programmable High/Low-Voltage

Detect (HLVD)

?5-Bit DAC with Output Pin

?Up to 14-Channel, Software-Selectable 10/12-Bit SAR Analog-to-Digital Converter (ADC):

-12-bit, 200K samples/second conversion rate (single Sample-and-Hold)

-10-bit, 300K samples/second conversion rate (single Sample-and-Hold)

-Sleep mode operation

-Band gap reference input feature

-Windowed threshold compare feature

-Auto-scan feature

?Brown-out Reset (BOR)