描述 Description

The PE43713 is a 50Ω, HaRP? technology-enhanced, 7-bit RF digital step attenuator (DSA) that supports a broad frequency range from 9 kHz to 6 GHz. It features glitch-less attenuation state transitions, supports 1.8V control voltage and includes an extended operating temperature range to +105°C and optional VSS_EXT bypass mode to improve spurious performance, making this device ideal for test and measurement (T&M).
The PE43713 is a pin-compatible upgraded version of the PE43703. An integrated digital control interface supports both serial addressable and parallel programming of the attenuation, including the capability to program an initial attenuation state at power-up.
The PE43713 covers a 31.75 dB attenuation range in 0.25 dB, 0.5 dB and 1 dB steps. It is capable of maintaining 0.25 dB monotonicity through 4 GHz, 0.50 monotonicity through 5 GHz and 1 dB monotonicity through 6 GHz. In addition, no external blocking capacitors are required if 0 VDC is present on the RF ports.

特性 Features

? Flexible attenuation steps of 0.25 dB, 0.5 dB and 1 dB up to 31.75 dB
? Glitch-less attenuation state transitions
? Monotonicity: 0.25 dB up to 4 GHz, 0.5 dB up to 5 GHz and 1 dB up to 6 GHz
? Extended +105°C operating temperature
? Parallel and serial programming interfaces with serial addressability
? Packaging—32-lead 5 × 5 mm QFN

簡介

PE43713屬于RF/IF射頻/中頻RFID的衰減器。由制造生產(chǎn)的PE43713衰減器衰減器旨在降低信號功率，同時(shí)盡量減少其對波形的影響。衰減值的范圍為 0 dB 至 69 dB，頻率范圍為 0 至 86 GHz。